Solutions to the problems of indoor air quality
title = "Using quality of indoor air problems "> Use problems indoor air quality
Living spaces
Coating wood, pressed wood furniture and cabinets. These products release formaldehyde gas in May.
Remedy: Ask about content formaldehyde before buying furniture or cabinets. Some types of pressed wood products such as phenol resin, with lower emissions of formaldehyde. Moreover, products coated with polyurethane or laminates may reduce formaldehyde emissions. After installation, Open the windows. Maintain moderate temperature and humidity.
Mat. Biological pollutants can grow on water damaged carpets. New carpet can release organic gases.
Cure: clean and dry water damaged carpet quickly or completely eliminated. If adhesives are needed, ask for low emissions. During installation, open doors and windows and use window fans or air conditioners. Vacuum regularly. Consider instead of carpets from wall to the carpet. The carpets are easier Remove and clean the floor below and also can be cleaned.
Floor tiles. Some contain asbestos.
Remedy: Periodically inspect the damage or deterioration. Do not cut, rip, sand or remove any material that contains asbestos. If you plan to make changes that might disturb asbestos, or if the materials are only slightly damaged, contact a professional for repair or disposal.
. Humidity Moisture encourages biological pollutants, including allergens such as mold, mites and cockroaches.
Solution: If possible, eliminate sources of moisture. Install and use exhaust fans. Use a dehumidifier if necessary. Remove mold and mildew by cleaning with a bleach solution chlorine (1 cup bleach to 1 gallon of water). Maintain good fresh air with natural and mechanical movement of air.
Fireplace. His home can be a source of carbon monoxide and combustion pollutants.
Solution: Open the tube when using the fireplace. Having the pipeline and chimney inspected annually for compliance with the combustion exhaust obstructions or cracks, excess creosote or other damage. Install smoke detectors and carbon monoxide.
Air conditioning. This can be a source of biological allergens.
Solution: If there a tray of water, emptied and cleaned frequently. Follow all service and maintenance procedures, including changing the filter.
Gas Heater or kerosene. These devices can release carbon monoxide and combustion pollutants.
Solution: Never use unvented kerosene or gas heaters. In the room where the heater, fresh air by opening a door to the rest of the house, turn on an exhaust fan and slightly opening a window.
Snuff. Smoke smoke contains harmful combustion and particulate pollutants, including carbon monoxide and waste combustion.
Solution: Do not smoke in your home or allow others to do, especially around children. If smoking can not be avoided indoors, Open windows or use exhaust fans and ceiling of a smoking area.
Curtains. Drapery May News be treated with a base finish formaldehyde and emit odors for a short time.
Solution: Before hanging, air draperies to ventilate odors. After hanging, ventilate the area. Maintain moderate temperature and humidity.
Lead paint. Paint manufactured before l978 May contain lead.
Solution: Leave lead-based paint undisturbed if in good condition. Before removing paint, test for lead. Do-it-yourself lead test kits are available at hardware or building supply stores. , Not sand, burn or remove lead paint, hire a person with special training to correct problems lead-based paint.
Animals. Many animals leave allergens such as dander, hair, feathers or fur in the air.
Solution: Keep pets outdoors as often as possible. Clean the house regularly. Deep cleaning areas where animals are allowed. Regularly clean pets.
Mites. Allergens can trigger asthma biological.
Solution: Clean and vacuum regularly. Wash clothing bedding in hot water above 130 degrees F. The use of more hard surface finishes, which are less likely to attract and retain dust mites.
Housing cleaning products. Unhealthy or irritating fumes may be released from chemicals in products.
Remedy: Select non-toxic and nonaerosol products. Use, apply, store and dispose of them according to the guidelines of the manufacturers. If products are concentrated, label the storage container with dilution instructions. Completely the use of a product.
Wooden furniture pressed. These can be a source of formaldehyde vapor.
Solution: Maintain moderate temperature (80 degrees maximum) and humidity (approximately 45 percent). When buying new furniture, choose solid wood or metal cabinets or those made with phenol resin, which emit less formaldehyde. Ventilate well after installation.
Unvented gas stove and range. They are a source of carbon monoxide and by-products combustion.
Remedy: Keep appliance burners clean. Periodically have burners adjusted (blue peak flame, not yellow). Install and use an exhaust fan. Never use a gas stove or an oven to heat your home.
Products personal care. The organic gases are released from chemicals in some products such as deodorants and hair sprays, shampoos, tonics, nail polish and perfumes.
Remedy: Select odor producing scent free products or low. Choose varieties nonaerosol. Open a window or use an exhaust fan. Follow the manufacturer when using the product and disposal of containers.
Cleaner air. These products organic gases can be inferred.
Solution: Open a window or use the exhaust fan instead. If you use air fresheners, follow signs Manufacturer. Select natural products.
Humidifier / vaporizer. Vaporizers cold mist can encourage biological allergens, including mold and cockroaches can trigger asthma and encourage viruses and bacteria.
Solution: Use and clean according to manufacturer's guidelines. Replacement of fresh water daily.
Moth. Paradichlorobenzene often contain the pesticide.
Solution: Avoid breathing vapors. Place boxes or other enclosures. Stored separately, away from residential areas.
Dry cleaning goods. Products Chemicals used in the cleaning process release organic gases.
Remedy: Bring odors to the attention of your dry cleaning. Try to air dry cleaners before bringing inside. Find alternatives to dry cleaning, such as hand washing items.
Unvented dryer. Dryers gas produce carbon monoxide and combustion byproducts and can be a fire hazard. Remedy: requires regular lint around and under the dryer. Provide air for gas units. Dryer vent directly outside. Clean and air vents regularly.
Of gas / oil / gas boiler and water heater. The air quality problems include discharge of carbon monoxide and pollutants combustion. Solution: Have your furnace and water heater, including gas piping and venting, an annual inspection.
Wrap asbestos pipe and insulation of the oven. These can release asbestos fibers into the air.
Remedy: periodically look for damage or deterioration. Do not cut, rip, sand or remove any material that contains asbestos. If you plan to make changes that might disturb the asbestos, or if the materials are only slightly damaged, contact a professional for repair or disposal.
Humidity . Soil moisture encourages biological allergens like mold.
Remedy: Check that the condensation on the walls, standing water on the floor, and venting wastewater. To keep the basement dry, prevent outside water from penetrating through the installation of gutters and downspouts, not watering near the foundation, grading soil outside the home, and the application of sealants on interior basement walls. For standing water, consider installing a sump pump. If water waste is the source, drain cleaning professional. If moisture has no obvious source, install an exhaust fan controlled by humidity levels. Remove mold. Clean and disinfect the drain in the floor in the basement.
Radon. This invisible, radioactive gas poses a risk of lung cancer.
Solution: Test your home for radon. Do-it-yourself kits are easy and inexpensive.
Hobby Products. Chemicals in products such as solvents, paints, glue and epoxy release organic gases.
Solution: Follow the manufacturer's instructions for use, ventilation, application, cleaning and storage of containers and disposal. Used outdoors if possible. Interior, open a window or using a fan exhaust. Tightly close containers. Clean tools outside or in a well ventilated area.
Cars and small engine exhaust. These are the sources of carbon monoxide and combustion byproducts.
Solution: Never leave vehicles, lawn mowers, snowmobiles, and so on in the garage.
Paint, solvents and cleaning products. These products May release of noxious gases.
Solution: Provide ventilation during use. Follow the manufacturer. Buy only the amount you need. If products containing methylene chloride, such as paint removers, use outdoors. Reseal container tightly. Keep products in their original packaging labeling. Clean brushes and other foreign materials.
Pesticides and fertilizers. Yard and garden chemicals can be toxic.
Remedy: Use nonchemical methods when possible. Follow the manufacturer's instructions for mixing, application, storage and use of protective clothing. Mix or dilute outdoors. Provide ventilation when using indoors. Keep them out of the house in their original labeled container. After using the product, remove shoes and clean their hands and clothes to avoid bringing the chemicals in your home.
About the Author
Handy Manson is a Licensed Contractor turned ’self professed’ internet geek, creating his local internet directory KW Contractor for the Kitchener Waterloo Area. As a fully licesensed contractor, Handy has over 20 years experience in several trades.
HEH GURL ( A STRIPPER’S SONG)
|
|
Warner Manufacturing 382XXX Tool 1000-Watt Radiant Heat Paint Remover $107.57 The Warner 1,000-watt radiant heat paint remover provides concentrated heat in a 6-1/2-by-3-1/2-inch heating surface to soften nearly 23 square inches of paint at one time. It features an open shield to get under edge of siding, a flip-over resting stand, plastic handle, and a three-wire ground cord. Wire support is provided for the tool when not in use. This 120-volt electrical paint remover is r… |
No Comments so far ↓
There are no comments yet...Kick things off by filling out the form below.